- Step #1: Calculate Your Basal Metabolic Rate (BMR)
- Step #2: Calculate Your Total Daily Energy Expenditure (TDEE)
- Step #3: Know Your Body Fat Percentage and Lean Mass
- Step #4: Adjust Your Calorie Intake for Weight Loss or Weight Gain
- Step #5: Calculate Your Carbohydrate Intake
- Step #6: Calculate Your Protein Intake
- Step #7: Calculate Your Fat Intake

On the keto diet, knowing how to calculate macros (fat, protein, and carbs) is much more important than counting calories. To enter ketosis, you will need to follow a low-carb, high-fat meal plan so your body can start burning ketones as its primary energy source.

Most people consume roughly 75% of their calories from fat, 20% from protein, and 5% or less from carbohydrates.

These are only rough guidelines. Your specific macros will depend on your body type, activity level, and weight loss objectives.

**Use the Perfect Keto calculator to know how to calculate macros**

**Step #1: Calculate Your Basal Metabolic Rate (BMR)**

Your basal metabolic rate (BMR) is the number of calories your body needs to support your vital functions (like breathing), without added stress (like exercise)[*]. The more mass you have, the more energy (calories) you need to support daily processes.

While it’s tough to get an exact calculation of basal metabolic rate, you can get really close by using the Harris-Benedict equation below. (If you use the metric system, the Mifflin-St.Jeor formula will be easiest for you.)

- BMR for men = 66 + (6.2 x Your current weight in pounds) + (12.7 x Height in inches) – (6.76 x Age)
- BMR for women = 655.1 + (4.35 x Weight in pounds) + (4.7 x Height in inches) – (4.7 x Age)

Here’s why the equation includes these factors:

**Height and body weight:**The more of “you” there is, the more energy you will use. In other words, the greater your body mass, the more calories you will need per day.**Age:**Since muscle mass gradually declines as you go past age 30, BMR decreases over time as well. That’s why this equation factors in age.**Gender:**Since body composition is typically different between men and women, gender plays into the equation.

**Step #2: Calculate Your Total Daily Energy Expenditure (TDEE)**

BMR accounts for the calories needed to support vital processes only — breathing and digesting foods, or processes you need to survive. Your total daily energy expenditure (TDEE) takes into account your activity level and exercise routine. By multiplying your BMR by your level of activity, you get the total amount of calories you will burn per day[*].

To do this, you will multiply your BMR by these numbers (choose the number associated with your level of daily physical activity):

**1.2:**Little to no exercise**1.375:**Light exercise 1–3 days per week**1.55:**Moderate exercise 3–5 days per week**1.725:**Hard exercise 6–7 days per week**1.9:**Very intense exercise

Exercise can include what you do all day at work,for instance, if you’re on your feet all day as a waiter or lifting heavy boxes.

After selecting your corresponding number, multiply it by the BMR from your calculations in step one. For example, a woman with a BMR of 1500 who does moderate exercise would multiply 1500 by 1.55 to get her total daily calorie expenditure: 2,325.

**Step #3: Know Your Body Fat Percentage and Lean Mass**

Measuring your body fat percentage is important for calculating how much lean body mass you have and how much protein you’ll need to maintain muscles. Why? Because muscle burns more calories — even in a sedentary state — than fat[*].

A person with a lower body fat percentage will burn more calories than someone who weighs the same but has a higher body fat percentage.

You can measure body fat in a few different ways:

**DEXA scan:**This is the most accurate method but takes the most time and money. It’s a type of X-ray that measures your bone mineral density and can give you a good reading of your body fat percentage.**Skinfold calipers:**This is probably the most popular method. They’re cheaper than a DEXA and most gyms and doctor’s offices will have these. You can even purchase them yourself.**Body measurements:**This involves using a measuring tape to get the width of your neck, hips, and waist to estimate body fat composition. While not the most accurate, it can give you a good idea.**Visual estimates:**If you’re not able to apply the above methods, you can estimate your body fat percentage visually. This means looking at your body and making a guess about how much fat vs. muscle you see. Keep in mind this the least accurate method and will only give you a basic estimation.

Once you know your body fat percentage, you can also determine your lean body mass. For example, if someone weighs 150 pounds and is 25% body fat, they can figure out their body fat in pounds:

150 pounds x 0.25 = 37.5 pounds of body fat.

To get lean body mass, use this equation: 150 pounds – 37.5 pounds of fat = 112.5 pounds of lean body mass.

You will use these numbers to calculate your protein needs. But first, you need to calculate for a caloric deficit or surplus — depending on whether you want to lose or gain weight.

**Step #4: Adjust Your Calorie Intake for Weight Loss or Weight Gain**

If you’re not looking to change your weight, you can skip this step.

If you want to lose weight, you need to eat at a calorie deficit each day. A reduction of 10–20% of calories is usually a good range to start with for weight or fat loss.

To reduce by 10%, multiply your total TDEE by 0.10, then subtract that amount from your original calorie count. This is the max amount of calories you’ll want to want to consume each day. Free apps like MyFitnessPal are a great way to track your daily caloric intake.

If you want to lose weight at a more rapid rate, feel free to increase the percentage — just know that it’s not recommended to increase your calorie deficit by more than 30% each day long-term.

If you want to gain muscle, you’ll need to eat at a calorie surplus each day. A 5–10% calorie increase is a good range for putting on muscle. Start by multiplying your total calorie expenditure by 0.05, then add that number to your total calorie expenditure. This is your daily calorie count.

**Step #5: Calculate Your Carbohydrate Intake**

The ketogenic diet is a very low-carb diet, where net carbohydrates only make up 5–10% of your total calories. Remember: Net carbs equal your total carb count minus the amount of fiber you consume. For most people, that equates to 20-50 grams per day. To calculate this, you will take:

TDEE x (% of calories) / 4 = Grams of carbs per day, or:

Take your total calories from your TDEE calculated in step 2 (or step 1 if you are maintaining your weight) and multiply it by 0.05 to get your 5% of calories number. Divide the end number by 4 to calculate your carb intake in grams.

Follow the same process to calculate 10% of your calories (take your total calories times 0.10 then divide that by 4 to get grams). These two numbers will be the range in which you want to keep your carb count.

For example, someone with a total caloric intake of 2,000 per day who wants to stay within 5–10% carbs from total calories (2000 x 0.05 or 0.10) would calculate between 100–200 calories from carbs, which is 25–50 grams of carbs per day.

**Step #6: Calculate Your Protein Intake**

On the keto diet, protein accounts for roughly 20-25% of total calories. While many keto dieters used to think that overeating protein would send your body into gluconeogenesis and raise your blood sugar, that’s not necessarily the case.

Your protein intake depends a lot more on your fitness level and body composition goals. And eating more than 25% of your calories from protein won’t kick you out of keto.

If you’re someone who’s sedentary, a good protein ratio is 0.6-0.8 grams of protein per pound of lean body mass, calculated in step #3.

If you’re moderately or lightly active, stick with 0.8-1.0 grams per pound of lean body mass. A person who wants to gain muscle (or lifts weights) will need to be in the 1.0–1.2 grams per pound of lean body mass range.

Use these ranges to determine a range for your protein needs in grams, then multiply the result by 4 for the same number in calories.

For example, a moderately active female who weighs 150 pounds and has 112.5 pounds of lean body mass will need 90-112.5 grams of protein per day. Then multiply that number by 4 to calculate 360-450 calories from protein per day.

**Step #7: Calculate Your Fat Intake**

Most experts believe that fat on the keto diet should make up at least 70–80% of your total calorie intake. But this can change a little, depending on your protein intake. To calculate your fat needs, add your protein and carbohydrate percentages together, then subtract from 100.

The end percentage (whatever is leftover) is your fat needs. Be warned: the amount of fat people need to consume to enter ketosis can be surprising.

You will need to eat large amounts of high-fat keto foods, like coconut oil, fatty fish and avocados.

There you go. You’ve just become your own keto calculator. This is all you need to know about how to calculate macros on the ketogenic diet (as well as get an overview of your body mass and goals).

**How to Calculate Macros: Ready, Set, Go**

Although these formulas can be helpful, there’s no guarantee they are 100% accurate. The goal is to have a range to work with, one that you can refine over time. As time goes on, you will learn which macro guidelines work best for your diet.

As always, the only way to ensure your macros get you into ketosis is to test your ketone levels. To learn how to do this, read this guide on testing your ketone levels.

I am having a hard time calculating this out, please help

Sher, check out our keto calculator here: https://perfectketo.com/keto-macro-calculator/ It will make things a lot easier 🙂

The last part of the calculator doesn’t seem to work on my iPad. I am unable to enter my calorie goal and it won’t calculate for me

The macros calculator gives me a total daily calorie intake of a bit over 1200 kcals for 4kg weight loss per month, while the calculation above gives me a suggested kcal intake of 1440 kcals. I followed the equations to a ‘T’, so not sure which one to follow. Im already on a 1200 kcal/day meal plan with intermittent fasting and not losing much, 3k in 6 weeks, what am I doing wrong?? Thanks for the awesome equations though, it’s very insightful to look at the whole breakdown of all the elements that go into weight loss, awesome!

Use the carb manager app or MyFitnessPal app and it will do

It for you.

Just wondering, I’ve got all my macros calculated but should I also be vigilant of calories? when doing the calculation it says I have 2600 but I find that way too many. 5’4, 237lbs.

Hey Kim, did you use our macro calculator to calculate? You can find it here: https://perfectketo.com/keto-macro-calculator/

Great question! I’m interested to know the answer.

How do you go about calculating or converting # of calories to grams of fat? For example, I’m 5’9 297 lbs (I seriously need Keto to lose weight!), my total daily expenditure is 2041 so based on the above my calories should be about 75% from fat or 1530 kcal. What does that convert into in sheer grams of fat? And yes I’ve used the calculator, I just want to know how to do the math myself.

Rudy, 1 gram of fat = 9 kcal. 1 gram of carb = 4 kcal. 1 gram of protein = 4 kcal. So you would just divide the number of fat calories by 9 to get the grams of fat. Hope that helps!

Awesome! That is missing from the instructions.

Are there issues with the calculator? I can input data up to Activity Level, but there is no field for the Calorie Intake Goal?

Thanks

Hey Cheryl, sorry about that. I’ll look into and get it figured out!

Hi everyone, I’m Crystal and I’m in the first week of my new Keto life. I’m feeling good. Very excited. I’m 54 years, 260 lbs and diabetic. I’ve tried everything to get this weight off. I think keto is for me I’m not having any trouble cutting out the carbs, sugar or dairy. I am going for it! LOL The keto calculator says to reach my goal I need 1310 calories, and 82g protein, 16g carbs and 102g fat daily.

Is the percent of carbs total or net?

This is so confusing pls someone help me find out my macros

Thanks so helpful!!! Lots of math but easy to read and get the right numbers for me…

that’s allot of stuff to calculate….a turn off…i have 3 lbs remaining to lose and want to maintain that weight…I’ve been doing the Ideal Protein diet successfully until the last 6 weeks and I’m stuck. My body fat is 26% at this time.

I’m also working out 2-3 times per week.

I am in the starting phase of Keto. How do I figure out my macros to begin the journey and then increase my fat and lower my carbs. I know it’s not a diet/lifestyle you can just jump into. I want to start and transition in a healthy way.

Thanks of your help.

I am having trouble with the calculator. It does not allow me to change the protein and carb intake. What I have figured out manually seems like too little calories, even for weight loss. It has me consuming less than 1,000 calories per day. I am a 5’4″ tall female who is 61 years old. I am fairly active and feel I’m setting myself up to fail with only 1,000 calories per day.

Calculator not working. Not allowing to enter any figures

Hi Rob in, you can try to clear your browser’s cache and re-enter your information.

But how do u calculate fat Intake in grams? I got as far as 75% fat how do I turn that to grams

It’s based on the total amount of your meals (with protein and carbs)

This whole thing is so confusing. Is there an app to figure this out as I enter my food?

Hi Cynthia, you can calculate your macro goal here . You can also use an app like MyFitnessPal to track your diet and macros.

Too much figuring and calculating cant it be a little easier?

Hi Peggy, use this Keto Calculator to get your macros.